Product ID:LEAD ACID BATTERY,0810-0004
MSDS Date:05/27/1986
FSC:6140
NIIN:01-149-4810
MSDS Number: BQDPW

GATES ENERGY PRODUCTS

441 HWY N
GAINESVILLE, FL 32602
US

Emergency Phone: 904-462-3911

Info Phone: 904-462-3911

Cage: 19209

ENGINEERED ASSEMBLIES AND COMPONENTS CORP

RALEIGH, NC 27604-2925 US

Telephone: 919-790-9700

Cage: 0AC65

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 69%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SULFURIC ACID (SARA III)

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 21%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NON-HAZARDOUS MATERIAL

Fraction By Weight: 10%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT APPLICABLE FOR FINISHED PRODUCT
USED IN NORMAL CONDITIONS. BATTERY CONTAINS ACID ELECTROLYTE
COMPLETELY SECURED WITHIN THE BATTERY CASE.

First Aid:BATTERY CONTAINS ACID ELECTROLYTE COMPLETELY SECURED IN
BATTERY CASE. IF BATTERY CASE IS PUNCTURED, COMPLETELY FLUSH ANY
RELEASED MATERIAL FROM SKIN OR EYES WITH WATER.

Flash Point:NON-FLAMMABLE
Extinguishing Media:MULTI-PURPOSE DRY CHEMICAL OR MULTI-PURPOSE CARBON
DIOXIDE.
Fire Fighting Procedures:COOL BATTERY EXTERIOR TO PREVENT RUPTURE. ACID
MISTS AND VAPORS IN A FIRE ARE TOXIC AND CORROSIVE.
Unusual Fire/Explosion Hazard:HYDROGEN GAS MAY BE PRODUCED AND MAY
EXPLODE IF IGNITED. REMOVE ALL SOURCES OF IGNITION. VENTILATE AREA.

Spill Release Procedures:AVOID CONTACT WITH ACID MATERIALS. USE SODA
ASH OR LIME TO NEUTRALIZE. FLUSH WITH LARGE ANOUNTS OF WATER.
Neutralizing Agent:SODA ASH OR LIME.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:READ MANUFACTURERS LITERATURE, WHICH IS AVAILABLE
UPON REQUEST.

Respiratory Protection:NOT APPLICABLE FOR FINISHED PRODUCT.
Ventilation:NOT APPLICABLE FOR FINISHED PRODUCT.
Protective Gloves:NOT APPLICABLE FOR FINISHED PRODUCT.
Eye Protection:NOT APPLICABLE FOR FINISHED PRODUCT.
Other Protective Equipment:NOT APPLICABLE FOR FINISHED PRODUCT.
Work Hygienic Practices:NOT APPLICABLE FOR FINISHED PRODUCT.
Supplemental Safety and Health

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID SHORTING. USE ONLY APPROVED CHARGING
METHODS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.NONE
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:PLACE IN ACID RESISTANT CONTAINERS. DISPOSE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. DO NOT
INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.